Level Crossing 1

Requires Basic Pack!

Contains:

• Crossing_Detector1
• Crossing_Detector2
• LEVELCROSSING1_V1.01

SET UP:

• Information
• Crossing Set Up

Crossing_Detectors:

Version: 1.0
Permissions: No Modify/Copy/No Transfer
Objects: 1
PrimCount: 2


The Detectors are detecting the coming or leaving trains for the Level Crossing. They need to be placed on the middle of the track, like signal detectors.

LEVELCROSSING1_V1.01:

Version: 1.01
Last Update: 08-21-2009
Permissions: No Modify/Copy/No Transfer
Objects: 1
PrimCount: 39


The 2 crossing bariers are animated.
The crossing has 4 lights and makes bellsounds.
Crossing Sound is provided by: Jan Taifun.

Information:

This Single Track UR Trains LEVELCROSSING1_V1.0 can handle both one way and two way traffic. So forwards and backwards that is.
The crossing bariers are animated.
The crossing has 4 lights and makes bellsounds.
Placement of more crossings on the sim is possible.
To do so, click the crossing and detectors and give them a unique number (00-99).

For example Crossing 1:

• [URT]_LEVELCROSSING1_V1.01,c12
• Crossing_Detector1,c12
• Crossing_Detector2,c12

For example Crossing 2:

• [URT]_LEVELCROSSING1_V1.01,c13
• Crossing_Detector1,c13
• Crossing_Detector2,c13

etc.

Crossing Set Up:

• 1. Place the [URT]_LEVELCROSSING1_V1.01.
  • Make sure the drivingplate of the crossing is below the "balastbed" pieces of the track.
  • TIP: Press Viewer topmenu/ View/ Highlight Transparent or KeyBoard shortcut CTRL-ALT-T (Win).
• 2. Place both Crossing_Detector1 and 2.
  • Place Detectors more then one train length from the crossing.

For example:

• 3. Default number of the crossing is c10, it will work without set-up. On the moment you want to place more crossings, you'll need to renumber them or the crossings will malfunction.
  • To do so, you need to renumber the detectors and crossing itself.
• 4. Click the detector/crossing and a menu will appear, choose: "Set Cro #", enter TWO digits, like 12 and press: "ENTER". You'll get a message that changes are made.
  • If something goes wrong with entering numbers, just choose: "RESET" to restore the default settings.
• 5. You can choose to "HIDE" the detectors via the menu, they will become invisible.
  • To make them visible again choose: "SHOW".
• 6. You can choose to set 3 different Safety Timers, default is 300 seconds.
  • If something goes wrong or as a train touch only one detector, without crossing, the safety timer will reset the crossing to the "open" state.
  • Touch the crossing, a menu will appear, choose Timer 180, Timer 300 (default) or Timer 600. You'll get a message (say) of the changes.

To the top.